HP 300 Graphite Electrode China Supplier For EAF Steel Plant

Payment TypeL/C,T/T,D/P,Paypal,Money Gram,Western Union

Supply Ability3000 tons each month

Graphite electrode packaging: wooden box with steel bars or according to customer requirements

Delivery Time15 Days

ISO: 9001 certification
Graphite Electrode SDS
More Graphite Electrode Introduction


HP 300 G​raphite electrode, mainly petroleum coke, needle coke as raw material, coal pitch as binder, calcination, ingredients, kneading, molding, baking and graphitization, machining and made, which is released in electric arc furnace in the form of arc conductor of electricity to heat melting furnace charge, with low resistivity, good conductivity, low ash, uniform and compact structure, good oxidation resistance, high mechanical strength, etc.


Application field

  1. Used for electric arc furnaces
    Graphite electrode is mainly used in electric furnace steelmaking.
  2. Used for ore heat furnace
  3. Used for electric resistance furnace

Our strengths

  1. We have RP/HP/UHP Graphite Electrodes.
  2. 20 years of professional production experience.
  3. We are factory no middlemen.
  4. So we have the best price.

Some Tips for How to Use the Graphite Electrode?

  1. The damp graphite electrode need to be dry before using.
  2. Check the graphite electrode if the thread in the electrode hole is complete when remove the foam plastic protective cap from the hole of the spare graphite electrode.
  3. Avoid using wire or metal brush cleaning cloth to clean up the graphite electrode surface and the hole threads.
  4. Make the connector screwed into the spare graphite electrode hole, do not collide with thread.

Guidance of Using Graphite Electrode

Being hard and brittle, artificial graphite electrode shall be specially handed. Proper operation may reduce the consumption and cost.

  1. Use special hoist tools to hoist graphite electrode. It is strictly forbidden to prize electrode ends up with crowbar. It must be handle with graphite care during transportation to avoid damage.
  2. Graphite electrode must be kept away from being moistened or wetted by rain, snow and water, and must be kept dry. It must be dried in the furnace before use. The drying temperature in the furnace shall be less than 100℃. The drying period shall be not less than 48 hours.
  3. Not to be stored up near clay, slag etc. to avoid surface pollution and increasing resistivity.
  4. Carefully checking before connection, make sure that the socket and nipple thread is not damaged, nipple pitch plug is in. Nipple screw shall not be damaged during lifting.
  5. Blow the nipple and socket threads with compressed air.

Additional information


HP 300 Graphite Electrode





Modulus of Rupture(Mpa):


Young’s Modulus(Gpa):


Bulk Density(g/m³):






Go to Top