Electrode paste is used on self baking electrode of submerged arc furnace
Application of high strength electrode paste on self baking electrode of large submerged arc furnac
Continue ReadingRaw materials for manufacturing electrode paste
The quality of electrode paste is related to the raw material formula and preparation process. Solid materials include calcined anthracite, metallurgical coke, petroleum coke and graphite electrode debris.
Continue ReadingReasons for turning back of graphite electrode in use
Most of the problems in the use of electrode paste are caused by the overlapping of multiple factors. Among them, there are many U-turns.
Continue ReadingClassification and properties of electrode paste
The latter is commonly used in closed electric furnace and large capacity semi closed electric furnace due to its low roasting temperature and easy sintering.
Continue ReadingProduction of high quality electrode paste from waste carbon materials
The theoretical research and experimental results show that the overall design scheme, formula and technological process of producing high-quality sealed electrode paste from waste carbon materials are feasible and reasonable
Continue ReadingBatching process equipment for electrode paste production
People pay attention to the ash content first in the index inspection of electrode paste, and should be updated to pay attention to the specific resistance first.
Continue ReadingWhy update the electrode paste equipment
The paste molding machine can not only produce large blocks of paste into small blocks, but also increase the plasticity of electrode paste
Continue ReadingIntroduction to the characteristics of electrode paste
The electrode paste is also called self baking electrode. It can only be baked by the heat in the submerged arc furnace.
Continue ReadingApplication and characteristics of electrode paste
The electrode paste is a kind of “continuous self baking electrode” in terms of its use method and property.
Continue ReadingDistribution of current between electrode shell and electrode paste
The third section is from the end of the electrode to 1200m / m above the slag surface, which is the working end of the fired electrode and is about 1.4-1.5m long.
Continue Reading