This project is equipped with a medium crushing and screening system for calcined anthracite. The calcined anthracite is fed by an electromagnetic vibrating feeder, and is fed into a double-layer horizontal vibrating screen and a single-layer horizontal vibrating screen via a belt conveyor and a bucket elevator. The materials are screened and processed. The particle size is greater than 10mm. Return to the intermediate bin, and then feed the material from the electromagnetic vibrating feeder into the double-roll crusher. Sieving again after medium crushing.

10~6mm, 6~3mm granularity materials can directly enter the corresponding batching bin, or return to the double-roll crusher to be finely crushed to below 3mm, which is convenient for flexible production adjustment.

There are 3 kinds of granular materials, 10~6mm, 6~3mm, 3~0mm, 6~3mm, 3~0mm. In addition to directly entering the batching bin, some of them are sent to the mill to pulverize into powder.

After being crushed to a particle size of less than 20mm in two stages in the processing section, the raw scrap is directly transported into the raw scrap bin for use by a belt conveyor and bucket elevator.

Crushing and sieving in electrode paste

Tell Us What You're Looking For.

Please Leave your message you want to know! We will respond to your inquiry within 24 hours!