Parameter index of outlet electrode paste
Electrode paste is a conductive material for ferroalloy furnace, calcium carbide furnace and other electric furnace equipment.
Continue ReadingDetailed introduction of Rongxin carbon Group electrode paste
lectrode paste is a conductive material for ferroalloy furnace, calcium carbide furnace and other electric furnace equipment.
Continue ReadingSpecial discussion on the mechanical strength of electrode paste
The height of electrode paste refers to the height from the upper end of electrode clip to the top of electrode paste. If the electrode paste is too high, the coarse and fine particles in the electrode paste are prone to delamination
Continue ReadingThermal shock resistance of electrode paste
The electrode paste is used as a conductive electrode under high and ultra-high temperature conditions. The operating temperature of the electrode extending out of the copper tile of the submerged arc furnace is often about 2000 degrees
Continue ReadingRegulations on adding electrode paste
The A-phase electrode of the 3# carbide furnace in the calcium carbide workshop had a soft break and missing paste accident. The reason is that there are still some loopholes in the electrode paste management in the calcium carbide workshop
Continue ReadingAnalysis of wear resistance of graphite electrode
Conductivity and thermal conductivity: the conductivity of graphite is 100 times higher than that of general non-metallic minerals.
Continue ReadingSpecification index of electrode paste
Ash content is less than 6%; Specific gravity greater than 1.35 g / cm2; The porosity is less than 27%; The current density is 6-9 A / cm2; The volatile control index is 12-16%.
Continue ReadingStratification phenomenon in the process of Cold ramming paste
In these points, what we can do is to study and discuss the cold mash itself, so that we can have a better development.
Continue ReadingProduction process and application of electrode paste
The electrode paste and sealed paste produced by the company are used in 3000kva-40000kva closed, semi closed and open submerged arc furnaces, which have achieved good results and are highly praised by many users.
Continue ReadingApplication of cold rammed paste and cathode carbon block
Experience in cold rolling process and on-line quality control of semi graphite carbon block and cold island paste applied in electrolytic cell.
Continue Reading